How to Repair Ford Escape 4X4 Rear Wheel Bearing,The Easy, Fast, Way

Man you make it look so easy I'm having straight hell on this pos

i shouldn’t have trouble with this method it’s like beating off!

Thanks for the video, I am not sure how you get the brake backing plate on with the hub though and how your replaced the broken bolts????? Surely you dont expect the rust to hold the arm on for the life of the car?????

Where can I buy this tool my friend

GREAT Video ! *Please say the YEAR of this Escape.

Thanks for posting! For all you guys doing this at home do yourself a favor and pull the rear diff and change the axle and yoke seals. You don’t need to pull the diff bracket on the drivers side (painfully because of the gas tank and “mushroom” washer) also the yoke is connected to the 4wd clutch assembly so it doesn’t set the lash on the ring and pinion gear set which makes things easier.

If your rear hub bearing is bad will that cause 4 wheel to not work properly?

What would be the harm in using a 3 arm puller pushing against the axle EDIT: tried and failed, it just pushes the cv axle out.

That cover always get forgotten, I’ve done it to. Thanks

Excellent job on the video!!

.keep adapter snug with lug nuts...no play

On mine I used a hydraulic ram to push the knuckle back just a bit more to get the half shaft out. Didn't do any damage and I didn't have to unbolt the pumpkin or the camber bolt.

Next time tie a rope to the grip area you'll have more force and the hands won't be hurting

Can't take anything you are doing seriously when you aren't going to bother replacing the trailing arm bolt! I make mistakes, but to leave out a bolt purposely is dangerous.

Great video, can you show how you replaced the broken Knuckle bolt and the pipe the screw was in. How did you solve the other broken bold that had a brake line. Can I rent the puller and slide hammer at a rental place. Thanks again.

Great Video. A+

Nice job mate! Keep up the great vids.👍🙂

2003 escape 4wd Rear CV Joint removal and install both sides Please

YOUR AWESOME EASY TO UNDERSTAND

Were you buy your Evertough puller from?

Omg were video you put axle back in"?" Can't end now lol

I did everything my hog head will not turn enough to get cv axle out. Plus the bottom stabilizer will not let go

making this way harder than it actually is for sure and using your press plates absolutely wrong its a wonder you havnt hurt yourself as i have done these jobs hundreds of times but best of luck to you

When you started removing the differential, the easy fast part went away.

How did you get that axle out I tried what you showed but not working

For a man working with no help one hand and a phone in the other, you did a gre a t job man 👏 ty for showing me how to do this. I'm a 30 yr old mom of a 10 yr old boy so I do have some assist. Just need to borrow a lift. This is a job to do on a lift not just jacking the truck up. Safety first people don't be stupid!!!! But yeah, tyvm, really appreciate the time you took to show us and show me how it made it easier ty I'll post my end result and lyk how the job went. Just need to borrow a lift for a hour or so 😆

So satisfying to watch!

Ok, I thought there had to be a better way: BUT! Thank God I have a heavier weight on my slide hammer. Thanks for the video.

Is larry and moe there too?

You must be kidding.

You forgot to put brake hub on before hub so you can do up bolts as you can't do them up

Thank you thank you. Great job. I'm doing an 05 Ford Escape and it's a job and 1/2. You did a great job in showing what I need to do. Clear and no BS. Again.Thank you .

Good lock for the brake back plate …🥴

LMAO
Oops that broke.
Oops that broke.
Oops dumped out my toolbox.
I'm not even going to mention the new bearing I just destroyed. Let's just replace it again and edit the video.

Good detail sir. I had no idea changing the bearing was a big job like this.

Good job brother GOD BLESS YOU ✝️😁🙏🏻🙏🏿☘️🤗😇💪🤝🤟

This dude is a mechanic with some experience that I can assure.

So many on here show the hard way to get these apart. You show the right way. Excellent!!!!!!!!!

Just did both sides of my 09 escape big help. One thing I'll note is make sure you put the brakes back on before pressing in the hub. The Drum brake shield won't fit over the pressed in hub

Use a ratchet strap to pull the knuckle far enough to get the CV axle and out of the differential.

a heck of a job... your video a clear and precise. Thank you so much for sharing your skill.

Your the man! Only good video I found, what a pain in the ass!

Where you buy the tool

Where you buy the tool

So, you aren't going to drill that bolt out and replace it? No way that vehicle is safe unless you do

Buen video gracias amigo por compartir

Thank you!!

The tilt works, a pita thouhfh

How did you get the axle back in?