How to Program ATtiny85 45 Arduino Tutorial 1.0.5 ESP32 STM32

I love it. Thank you So Much
Question:
1. Is any simulator for attiny?  Like in Proteus? 

HI!
I tried with Arduino IDE 1.0.5 and got the "avrdude: stk500_getsync(): not in sync: resp=0x15" error. I fixed it with a 10 uF. And then showed me the error "avrdude: stk500_recv(): programmer is not responding"...Later, I installed the Arduino IDE 1.0.4 like the HLT's webpage says, and it worked like a charm!
Thanks!

Doesn't seem to work getting "avrdude: stk500_getsync(): not in sync: resp=0x00" while trying to upload the blink sketch.setup:Arduino 1.0.5-r2, Arduino Leonardo - Attiny 85,No cap tried with 1uf I don't have 10uf lying around. Programmer:Arduino as ISP ,Serial Port:Correct , Board:Attiny85 1mhz clock.Heartbeat seems to work just fine on pin 9 so wtf

Worked like a charm, thanks so much for the tutorial!
I'm using an ATMEGA168 with Arduino 1.0.5 and an Attiny45.

I am not able to get the boards to show up.  I have downloaded the zip file and extracted it in both the sketchbook where I made a new folder called hardware, and I tried it by downloading it in the actual arduino hardware folder where the other boards are.  Neither one is letting me view the attiny boards after I close and reopen the IDE.  any help?  Thanks!

...had a typo. I meant "Could NOT find boards.txt ..."

Finally I programmed ATiny85 after 6 hours of straggle.
Thanks of to you guys. 

GOOD, VERY WELL 

I tried it now for at least 10 hours. haha i read 100 threads in help boards. NOTHING worked. But now it worked. Finally. I Just took a new Atmega328P on my UNO. I do not fucking know why my other Atmega328P can't program the Attiny. So, if you have any unsolvable problems just buy and try a new Atmega328P! 

Good video. I have a doubt. I have been looking at various videos on programming the ATMEL chip using an Arduino that programs the chip with the Arduino Blink sketch as part of the demo, but some videos also show that before loading the sketch, the ATMEL is programmed with the bootloader. Your video does not show that. Is this necessary? Thanks

I have one line of code on my chip I need to change, I don't own an Arduino, is there a cheap way I can do this without having to spend?

Thanks a million, I spent all day playing with an ATting and your video it was so helpful.

Is there anything I have to differently if I want to program it with a mega 2560?

Awsome thanck ,you very much

Thanks. I'm trying to understand what is happening here vis a vis what I normally do on my Uno or Nano. So the nano is acting as a programmer to upload the sketch to the tiny. I've heard a lot about a bootloader, where does that fit in?

hello, my problem is it I was unable to use ir remote library with attiny 45, because of timer different for attiny and atmega can you make video attiny 45 with ir remote control

Do I really need the breadboard? I mean for the final project

i have tried everything to get my arduino and the attiny85 to work together and using your video to go through the steps .. i was successful, the arduino i used was a uno and the ide was1.8.5 thanks alot for this breakthrough( by the way dont forget the 10uf capacitor or you will be scratching your for days )