Комментарии:
Excellent video. Thanks for explaining so well
ОтветитьDoes this I’m include Gen 3
Ответитьthe info you are giving on the 200KHZ 83KHC is not correct.... I'm sorry I don't have the time to give you more info.....but.... the 200KHZ is for deeper water and the 83KHZ is fore shallow water
the 200KHZ is a much narrower cone and the 83KHZ is a much wider cone,,,,exp. if you use the 200KHZ in about 30ft of water it will only cover a very small area and not much detail. There would be no fish arche it would only show blobs . if it is set at 83 KHZ the cone would be much wider 30ft of water and the sonar would have more time and would show the fish as a arche
Do you have a contact to discuss a particular problem on a Carbon 12?
ОтветитьIs it the same way in the one sold at Walmart
ОтветитьThere are a lot of fish showing for a boat just sitting there. You must be floating at the aquarium at Bass Pro! 😂
Ответитьany idea why I cannot see both channels in my sonar settings for transducer type? multi source is selected. 18.2 update currently installed. unit will not take the 20.0 update. when I download 20.0 update to micro sd card, I can see that it is a upd file, but unit but unit says something to the nature that this is not the correct file. currently have a total scan transducer and a hdi 50/200 installed. black connector in structure port (channel 2) and blue connector plugged in sonar (channel 1). unit will not do a hard reset either. if I manually switch back and forth selecting the proper transducer types, they appear to be working and I can hear them pinging. I have not tested them on water yet.thanks for any help.
ОтветитьAnother great video my go to training site. Thanks a bunch for your time.
Ответить