First Look at the xTool P2 Honeycomb

My man! Thank you bud

I like Lucian’s very much. I am glad & fortunate that I will have both!

What's the difference in length between the 2 different honeycombs please? You only mentioned the width/thickness. Both are badly designed imo (& both also emphasize a flaw in the P2 design) I wonder why no one has thought about designing honeycomb that slides into the riser base (hence giving the ability for the honeycomb area to fit full size sheets) The pins that come with the xtool honeycomb are useless if sheets are larger/same size than the honeycomb area 🤷‍♂️

xTool needs to stop adding the honeycomb as an afterthought and start with the honeycomb and design the laser machine around it. They also need to understand the customer base, and what they need (U.S. customers being able to properly cut 12" material). The xTool honeycomb's are really nice, however, they don't need a full "C" channel. They could easily get away with less frame on the top side.

I saw someone on the P2 facebook group and they removed the rubber feet from the "wings" and it made the honeycomb the same height as the slats.

Working for me.
Just want to know how to clean it.

Hi . I just got my M1 Monday last week and beging playing with it to day. I'm just a little Intimidation to work with it. But I got it to help me do some etching 100 stemless 15oz wine glasses , Have you tryed the black laser marking paper the came in the premium material package? Would you make a video .

I haven't used mine yet, but I see similar issues with what you describe. Also when you go over the frame of the HC, the material will be 1mm higher on the frame which can already result in a different cut or engrave performance?

For now I do think the HC is made for smaller things.

Which honeycomb would you buy again?

Have you tried it with the slate flat mode?

which do you use more ....the slats or the honeycomb...I think I would use the honecomb more as I am struggling to get some materials to lay flat. Four hold downs you get with the slats are not enough in my opinion and at $6 apiece plus shipping is not what I am goint to pay.

Thanks so much for the video!
I'm brand new to the P2 laser and was a bit concerned when I received my xTool HC panel because the fit didn't seem right to me. Your video confirmed I'm not entirely crazy.
Happy New Year!

How do you get the after market one

do you then say in XCS "baseplate Removed" ? then aimed measure?

I found you because of being in the XTool P2 facebook group, and was told you are the ultimate P2 person...I am a bit disappointed to see that the latest video you have made for the machine is a year old...do you plan to use it any more and do any further instruction with it? I am getting the P2S and was really hoping to find someone who can be a big help to me, a newer laser person...