DIY Epoxy Flooring Over Cracked Concrete Start to Finish | Stone Coat Epoxy

Who has questions? I'll answer each one below, thanks for watching everyone - Mitch

How about toughness--this is a floor! Shoes, dragging stuff, how does this hild up? ALso-just roughly, I hvae a 12 x 16 foot slab concrete inside floor to do. About what cost would that many square feet be?

Does it end up slippery? It looks gorgeously glossy.

hi sir, our concrete slab has tiny cracks.. what is the best solution for this concern? thank you so much..

If you choose not to epoxy, but want to just seal, do you need to do anything other than grind and seal?
Also how do you know if your old concrete slab is too messed up to be a decent floor?

I am building a tiny house that will be 480 square feet how much would it cost me to do that to the concrete

Are you saying it’s not a good idea to do a basement right now in January in Chicago?

What if you want to do most of your floors in the house. Can you do one area, let it cure and then pick up at the edge for the next area? Will the new glom onto the one just cured without leaving a joint line? Thanks.

What if you do not want a high gloss finish like that? You very final clips in the video seem to look more matte finish.

I thought you had to use an epoxy primer over concrete? Is this true? Can I just do like you did and just use regular epoxy mix and spread it thin in a dark color as a primer base?

I like the video that's awesome.Thank you new york

Can this be applied over OSB?

I ripped out the carpet. I invisible cannot epoxy right over the MDF subfloor. Do I have to use concrete? Is there another medium I can put over the subfloor to then epoxy like this?

Can I put Epoxy, like you do in this video, on a bathroom floor with underfloor heating. I like your video, greetings from a viewer in Norway.

what do you recommend for chipped step edges? and/or the lip of the garage having a big piece of concrete (about a 10" long triangular piece) that's chipped off the edge and just kind of resting in the spot it was chipped from?

great video very informative.
the only question i had is why are all the tools brand new lol

black grey and dark red

"You have plenty of time, it takes 25mins to set"

Me, who struggles with 45min setting drywall: Oh great heavens

I’m all ready to this but then I got on the stone coat epoxy website and realized that if I buy from them it will cost about $1000. I’ll try something else 😂

Question: Who makes the sander/vacum combo tool shown being used? Price per lineal foot for the two part mix? I have about 200' exterior slab that has over 1/4inch height difference. What thickness should be maintained for best result? Thanks for the alternative to an expensive repair!

awesome video thnakyoufor sharing it

Shiny. Just like Macy’s.

I like your way of prepping the surface. Grind it clean instead of using a chemical.

Cute kids walking on all fours. Reminds me of my childhood.

i have 900 sq ft im trying to go with a metalic black white blend what do you recommend? I think after watching you i can make an attempt!

How has it stood up with the passage of time Mitch? Also can it be used on a covered concrete patio. Many thanks C

Hey Mitch! I know...old video but I'm hoping you might still answer the question..when you're done mixing with the paddles are you able to rinse them off and re-use them or do you have to toss them afterwards?

Thank u so much for helping and explaining every single steps

Thus crack is in my kids home ,and l was so upset about it, and now m glad that you you made works on this crack ,like you great awesome shares on how to solves it🥺🥺🥺😯👍

How long it will last?

How do you fix major pitting and spalling. Most of my garage is and I want to do metallic epoxy. Should I resurface with a high psi self leveler? Also I have double cracks with large chunks in between shoul I remove the large chunks and pack hydrolic cement with aggregate in there?

I absolutley love the results of this type of floor covering. could you please tell me where I can find everything i need? I want to do my plywood floor.

Can you do epoxy floors on a screened in porch that will be exposed to the elements?

I think I'm going to try this, now after watching this very informative video - we need to replace the indoor/outdoor carpet under my husband's aquariums!

how much of your epoxy would I need for 165 square foot basement room?

Is that just black dye that you mixed with the sealant epoxy coat?

I noticed when you did the reveal after 48 hours the floor had a glossy finish but at the end of the video the floor had a matte finish. How was that achieved?

How slippery are the garage floors when completed? Is there an anti skid element?

What would be the finished thickness of all layers together? I assume you are using 3 oz/sq foot for the colour coat? If you wanted this in a bathroom is there anything you could add for slip resistence?

Is there a giant grinder to rent? Finishing an entire basement with the tool you rented would take me a long time to complete. BTW love your video it was simplistic and promising.

Thank you I like ur work I want to work with u a month for free

Question sir, did you add like a clear coat?

This video is great! Man detailed and not a boring video

That's beautiful really beautiful. Happy new year to you and your family.

It looke terrible to me, those colors do not blend together at all

grab golf cleats from goodwill $10 ..... would soccer cleats get it done?

Pink,black and copper bits please

how much was all the materials?

Hi! Gorgeous design! Do we need to grind brandnew concrete floors that have just been made? (For a new room extension?)

How do you diamond grind the corner of a room?