Can A Kioti Tractor Pull A HEAVY DUTY 15 Foot Batwing Mower?

Oh ya !!!

Good to see it worked

Get it done ✔️

Joe that is one big bat wing cutter. It will make your job so much easier. And give you more hunting time.

It will pull it, and turn the shaft, but IMHO it will will be very hard on your tractor in warm weather! It will also be hard to use on any wet ground too. Watch for engine temps, and keep your radiator screens clean! If I would were you, I would go with the smaller version! Wet grass is gonna be a lot harder to cut too.

👍💪 Excellent job! Great video and awesome mower! That thing is a monster! Very impressive!🚜😎🇺🇸

Can't beat the look of a freshly cut field. The old rule is cutter width size to be equal or less than distance of outer rear tire to outer rear tire but these salesmen know their product well. Nice job and the rotary cutter's an obvious winner and keeper.

I got into some honey locust this week, they have some wicked thorns

That thing sounds awesome spooling up. I scored a hunter orange Kioti cap when I bought mine but a camo one would get more use. Great review on the mower.

Your time is important trade in the 6 ft and enjoy life.

Hi Joe, great video of your new winged Brush Cutter. It seems like it was struggling when you started up the PTO but did well with power when at full speed and cutting. Did you notice a sizable difference in the Fuel usage with it pulling so much weight and cutting a 15 foot swath? Hope it continues to work out well for you and save a lot of cutting time.

Sounds like you made the decision to go ahead and make that yours. Good luck with it Joe, should save time, and in the end make the property easier to manage. Still looking for a shed or two from last years deer. Though you might fine a few in that thick stuff, or they may fine you by ending up stuck in a tire. Take care Joe!

The field looked great after you cut it. Hmmmmm I’m thinking don’t purchase it now and “demo” another cutter in 3-5 years to save money?

That particular cutter is probably going to run you about 20 to 22K plus plus I can cut up the 3" trees
I would end up getting a 10 or 12' cutter and save you about $10-12k

#1 when you are no longer testing and actually working the tractor in warmer weather and thicker grass carry a leaf blower with you. My RX7320 pulling a 12’ batwing in the summer is a workout. When engine temps start to rise, stop the tractor and blow out the radiator. You will also be better off ditching the loader when mowing. I added ballast to the front tires, makes a huge difference on that tractor. #2 you aren’t saving yourself anytime mowing in L2. That baby will eat grass way faster. I mow at 6mph.

She "tikk." Lol. And wide. Nice demo.

I don't know. I don't know your ground but if you use Larry's you're probably a neighbor. If you gotta go that slow, and maybe you just did for the demo, I think you could cut more in less time with an 8 footer if it'll go through your gates. Then again, the medium duty is 1000lbs lighter if I recall. Or use a 12 foot batwing.....choices.....

Thank you Sir!

We pulled a 15ft with a 75hp (engine) 64 pto tractor and it toyed with it. It's more of a weight issue than hp.

Like I said B4..it is a beast. Nice Job.

I have the same tractor and a Woods BW 15.50 cutter. The AC will not keep my cab cool in hot weather when using the cutter. I keep my radiator clean.

Moving awful slow, Maybe consider a lighter one to make some time if you dont need to cut 4" stuff. Takes me an hour to do 10 acres with a woods 15.50 which is their lighter one (2 1/2" stuff)

If you bush hog for others, what do you charge with a big cutter like that?

Cool video. Thanks

You need a rhino TS10 or 12

that is one bad@%% Hunk of machine you are pulling with that Kioti. As was mentioned by some others, keep that radiator clean, (Radiator Genie) I am still getting lots of use out of my 8 foot Titan and I am impressed.

If one doesn't need fields for hay or crops then might consider planting trees, especially in a place where there's nowhere enough trees. After ten acres I consider it wasted mowing, unless one has all kinds of money with nothing else to do and wants to ride around in a AC tractor........

Can you do a video on how to load on on a trailer with a tractor?

That’s a fools errand you are running! Neither your or Larry don’t know anything when it comes to cutters matched to horse power. I shit canned my 15’ 2615 legend batwing bush hog years ago. I pulled it with. 125 hp T6050 NH AWD tractor. I instead switched to a 10’ 3pt hitch mount cutter and cut at 6-7 mph. I can cut 40 acres in 5 hours or so. Major fuel savings and savings in my personal time!! It’s just not safe pairing that small of a tractor with a cutter that large!

The RX7320PC we use on the farm in Northern KY runs a 12' standard duty Bush Hog 1812. We have hillside and I can keep it in 5-6 gear consistently. It really gets it done!

That's massive! Maybe trial a spray unit to kill the thorn bush.😅

Joe The Farmer I had a DS4110 and have just upgraded to a NS6010. I have owned all brands of tractors but I find that the warranty, the well built equipment keeps me buying Kioti. Great video. Thanks

I mow with a 10ft cut Titan 3pt lift brushhog which really does everything I need to do. But I'm eyeballing ole Kapper's 12ft batwing mower. Actually I think a 15' mower will be overkill for my few acres as I'm constantly maneuvering around and mowing over all kinds of spots and places. Looks like you bought this one...still think its right for you one year later?

Why would anyone try and cut something like that to a finish cut on the first cut. Raise the deck up, do a precut then do your finish cut.

I have the same tractor and I can tell you it cannot pull a Woods 1550. After about 2 hours the AC is useless. I keep telling the dealer something is wrong and they keep saying nothing is wrong!

JOE you always do good job

I got an old batwing 320. I judged not enough hp so I took off a wing PTO shaft and chain it up. Voila! and you have a 14 footer. But I have been laughed at by some hay merchants. They say drop the wing and use it. They say my Kyoti DK90 will handle it. Hint, I have a ridge I have to mow and cut it at an angle.

Thank you, just ordered my 1st ever tractor. Been watching all type of videos. I feel really good about my purchase. Thank you

15’ batwing anything 50 hp plus should pull it

Joe, I love your channel and video content. Above all, your faith in our Lord Jesus is the most important thing of all to all men.

My question is: what size tractor should I get for a 1 - 1.5 acre fruit/veggie garden and then to cut, rake, and bale hay. To brush hog, plow, box blade, etc..

Plus, what brand would you trust the most for my "1 tractor fits all" approach? I will be on 10 acres, but I will do tractor work for family and neighbors around me.

R1 ag tires would make a world of difference on your tractor. I have the same rx7320 and batwing cutter and believe me when I say r4 tires will slide around with a big load behind the tractor