Комментарии:
Hermano, tú manera de arrancarlo es equivocada.
ОтветитьWhat ya gonna run it for?
ОтветитьNice thing to test your nerves !
ОтветитьGreat video! I want one!
Ответитьnice little motor
ОтветитьPut it on an old till
ОтветитьWow, you have the nicest lawn in the neighborhood......
ОтветитьWHERES YOUR PIECE OF WOOD YOU SAVED - every garage has one.. Two seconds mounting it to a 2/6 would have made a very different video
ОтветитьHow do you know when someone has an iPhone?... They'll tell you
ОтветитьNeat video but I am not impressed. So Sorry ! Barry
Ответитьpop the real off and look to see what size bolt is on that shaft. then use a drill
ОтветитьHolly Smoke !
ОтветитьNow that the engine is running, you can mow your grass. Your neighbors are complaining
ОтветитьNow i want to put this on a bicycle...
ОтветитьI like it but dude mount it to something as you probably already know after wrestling with it ! Good luck hope you figure it out
Ответитьreally
Ответитьyeah i was right
ОтветитьThis is an extremely useful engine if you have used fryer oil and can make biodiesel. Or, you could equip it with a fryer oil heater and run it straight. Beat Big Oily. Make em paranoid.
ОтветитьAmazing traction for a small channel, 500k views. I can understand and imagine your excitement haha well done
ОтветитьGo Vols!
ОтветитьFirst thing remove recoil use cordless drill until it starts with one pull
ОтветитьAnti misquito gadget
ОтветитьLooks like you need to be priming a weed eater my boy!
ОтветитьYou don't own a gas can..... That would explain why your lawn is 2 feet tall.
ОтветитьHe lives along a coastal state south of the mason dixon line. Better not be in Cali
ОтветитьIf you dont know any thing about motors,you shouldn't have bought it.
ОтветитьMore and more cheap TAT from Amazon what ever happened to Proper Engines...
ОтветитьIt’s diesel wtf is dezzzzel
ОтветитьYou should be ashamed how bad your yard looks. I'd hate be be your neighbor.
ОтветитьDo they make these with a vertical shaft? I'd love to make one into a diesel push mower!
ОтветитьYou're a masochist for trying to start ANY pull-start engine w/o bolting it down! Even a couple grabber screws into a 2x6 would save you untold frustration.
ОтветитьYou can not run them on old motor oil on less you preheat the oil with heat trace to 350° F up to the injector -
That's how it's done with engines that run on heavy oil - if you run straight motor oil the cylinder can carbon lock from carbon build up - also you will have to pull the head and lap the valves in often and clean the carbon out the head and piston rings - even running them on preheated fuel oil we have to brake the engines down at times because of carbon build up -
I have a little pocketbike that's only 49cc but I want more power if I can get it to fit I can get a lot more power and should be more torque too hopefully
ОтветитьI could not get a new one of these started no matter what I did but your injector bleed procedure solved the problem. A few pulls after that bleed, and it started right up. I've not heard anyone talk about that before. Great information! Thanks!
ОтветитьGood shit bro, we need to start a damn channel with Brandon!
Ответитьwhn starting it your supposed to pull until the compression stroke,press the decompression and then pull, not push it when you want to and hold it down and let go
ОтветитьNo, you don't suck. Your videos are good, and I like watching them. But you struggled on the last diesel video I watched also. Bolt the damn thing down already. Its a diesel, its going to require you to pull like a man. Not easy to do when you are holding the engine! Just playing with you. Thank you for your videos.
ОтветитьWhat a putz....lmao....thanks for posting, though, mate!!!
ОтветитьRemove the pull rope assembly, use a socket and drill to start the engine.
ОтветитьThis goes for 100 on Aliexpress.
ОтветитьI don't know how far you got with your project, but I can tell you that your engine won't work with used oil. Forget it.
ОтветитьI have to buy one now If you can start it anyone can. The compression release is automatic, you don't have to start it like one of those Packnisen black oil engines.
Ответить3000 rpm engines are needed for generators in 50hz systems, where 3600 rpm is for 60Hz.
ОтветитьDo you have to crack the injector every start?
ОтветитьDid anyone else notice that they put the fuel filter on backwards?
ОтветитьI would definitely buy one with a battery starter 🤣
ОтветитьSounds like a semi truck engine when it is running smoothly. Love the sound of diesel engines over gas engines. Gas doesn’t sound as nice as diesel.
Ответитьi am not buying, unless they come with electric starter.
ОтветитьYou want filtered oil if your gonna burn used oil
ОтветитьI guess diesels are cool enough but what can you actually do with one this small.
Ответить