Комментарии:
Klein 13-in-1 pocket screwdriver from Lowe's. 17 dollars with tax. Most screwdriver like edc screwdriver.
ОтветитьI'd say it's O-tackle because you can tackle and solve some problems with it!
ОтветитьGreat selection!
ОтветитьThe Lollipop would be perfect if it could take double sided bits.
ОтветитьI think this category should be discussed under two main headings. 6.35mm (1/4") and 4mm (5/32") precision screwdrivers. In the precision screwdriver section, I use the first option by taking the bits from the Hoto set. Because when you remove the clip, it is lighter than Hoto. Of course, I had to eliminate some bits I wouldn't need, but I was able to fit 9 double-sided bits. Of course, the Hoto set is also very useful and stylish, but as I said, it is a little heavy. For 6.35mm, there are cheap L-shaped plastic coated arms. You can use double-sided bits. I bought them and wrapped the bits with paper tape and put them separately. In this way, since it is insulated, the risk of electrical shock is reduced, I can apply force, reach deep screws and it is cost-effective. However, I also added a 4mm converter to the end. (Translated)
ОтветитьWhat was the precision decide at the end with the frag pattern on it ?
ОтветитьI just ordered a Makita E-15811 after I didn't like most options. Very affordable too.
ОтветитьScrew pop.
ОтветитьROKTOL 12-in-1. That’s what I carry - $20
ОтветитьIf youre really gonna use your gear sum of These are Not it to nice/expensive for Daily use if you want something usefull and much less expensive buy a wera zyklop Pocket set or the normal version
ОтветитьShould take a look at 711L's Lollipop driver.
ОтветитьI made a "light duty" keychain bit driver last night. Wish I could show it off
Ответить711L Lollipop for the win.
Ответитьi would add a victorinox cybertool to this list. i love mine with after market prometheus design werx titanium scales(unnecessary but awesome)
ОтветитьTitan Nano Ratcheting Swivel Tool. You're welcome
Ответитьwhats the last driver u showed that spiiiiins
ОтветитьYou can put an extension peice in the bit vault diagonally, I know that’s not ideal but hey
ОтветитьRATCHET T-HANDLE SCREWDRIVER EDC SABERTOOTH TOOL POCKET SCREWDRIVER RATCHET PRO
ОтветитьMy favorite is the Combat beads mk2 screwdriver
ОтветитьI have the Pittsburgh set. I put in better bits - Red=Phillips, Yellow=Flat, Blue=Torx.
ОтветитьKnaf's bit diver! Comes with 3 wiha bits, 25 bucks, super slim profile!
ОтветитьFor the Lever Gear BitVault, if it's that close to fitting an extension, grind, sand or ideally machine the end so it fits in there.
ОтветитьI see you are also carrying the Leatherman Ratchet Driver. I was a bit disappointed with its build quality, with the plasticky ratchet switch that does not really snap nicely into place. Is anyone aware of a better option (which is still compatible with the Leatherman flat bits)?
ОтветитьTbh the best screw driver I ever had for less then 20$ is from aliexpress their solid aluminum screw driver set come with like 50 nice bits and case the size of my s22
ОтветитьWhat is the watch that you are wearing here?
ОтветитьWow, what timing…just decided to try looking for drivers for my EDC, and there you are. Great recommendations and reviews, thanks!
ОтветитьI only really carry a TI Croc Tool from Vice Anvil Tactical as my flat head screwdriver while using the Philips head screwdriver insert on my Keybar.
ОтветитьGreat vid. That 711L EDC Ratchet Wrench is super cool. I like that Big Idea Design EDS II too.
I'm working on a redesign of the Bitvault to launch next year. I'll be sure to get an extension option in there. Cheers.
Olight recently released the Opry. It is a pry bar, bottle opener, wrench, stores 3 double sided bits, and has a pocket clip. Plus it’s only $50 with the potential of being cheaper when they run deals.
ОтветитьPb Swiss insider pocket bit driver is a great option for a bag or cargo pants pocket. It’s the smallest I’ve found that’s still big enough to be useful. I work facility maintenance and it’s my edc at work. Outside of work when I’m in jeans or shorts I carry the bit bar inline max.
ОтветитьHow about the Kershaw TX TOOL? Is it good?
Ответитьcheck out the picquic teeny turner
ОтветитьVictorinox cybertool
ОтветитьI’m a big fan of the Gerber Armbar Driver
I’ve used it many times fishing , to tighten the screws on my reel,and the scissors work great to cut the newer super line.
I edc a countycomm titanium screwdriver they sell for dunno like $30 and it's tiny. Love it so much but bits don't go inside. But it works well 🙌
ОтветитьThank you!
ОтветитьExcellent voice
ОтветитьKind of surprised not to see the micro-mark dual drive ratcheting screwdriver on the list it one I edc regularly
ОтветитьGreat top ten there. I really like the bit bar max. It comes the closest to what I have had in mind when thinking about an edc screwdriver: small, many bits, tough as nails.
Imagine a full dressed one 😮😮😂
I definitely use my Milwaukee 1505 for the screwdriver everyday.
ОтветитьMy favorite EDC screwdriver is just a mini Craftsman 1/8 inch flathead. It's a common size I need, and it also works as a prybar and a bottle opener.😂
ОтветитьHey Taylor, have you ever checked out the Strikerbit from a company called Microcarry? Its the one I use in my EDC and its one of the best pocket screwdrivers I've ever tried. Check it out!
ОтветитьTime for me to buy something I don't need!😂😅
ОтветитьI paid 26.90 for my armbar on eBay new free shipping.
ОтветитьI love the smallrig folding camera tool. It lives in my belt work pouch and can handle most things I come across at work, and I always have it on me. And in addition it can hold a set of screws and bolts in the driver itself for any quick fixes or rigging options. It's built mainly to use on cameras and other filmmaking accessories which is perfect for me.
ОтветитьI just ordered the 711L Mini Ratchet Wrench and I think with a few Wera bits and a bit extender this will be a good EDC tool kit together with my Knipex XS. I carry it in my Blue Ridge Overland Gear Bum Bag.
I really like the Big Idea Design screwdriver products, but they are sometimes not easy to get in Germany and cost the equivalent of 150 - 160 US$. That's just a little too expensive for me.
HOTO Precision Mechanics Screwdriver Set, 24 in 1... can't go wrong with this one. Also, Topeak sets are great!
Ответить