AIM-9L Sidewinder MissileReplica Build (DIY Missile - Build Pics) #SIDEWINDER #AIM9 #REPLICA

3D Print Files
https://cults3d.com/:1029651

MADE TO ORDER - INQUIRIES
[email protected]

This is my 57% Scale Replica Model of AIM-9L Sidewinder Missile. The replica in this video is the second AIM-9L I built. This is base on 3" aluminum tubing. I used thicker wall because the build before this I had issues with fastener threads stripping the thin wall aluminum.
This is my pair of full scale AIM-9X Sidewinder Missile replicas. The models took about 7 months to complete.

------------------------------
LIKE, SUBSCRIBE, COMMENT
------------------------------

I hope you like the video! Any feedback is appreciated.

Here's some info on what goes into the build and some features

Full Scale AIM-9X Sidewinder Missile
- Based on 5" aluminum tubing, 1/4" wall
- The entire model comes apart and can easily be put back together
- There are over 120 individual parts, and over 350 fasteners
- Rear wings rotate
- Rear wings are removable, they are held in with ring magnets and a short steel shaft
- The paint is Sherwin Williams Aerospace Military Coating, it's the paint they use on the real Sidewinders. It's 2 part urethane
- The seeker camera is on a 3d printed gimbal, it rotates and angles up and down
- Thrust vectoring vanes rotate
- Targeting section has Lexan windows, real photosensors, and a real computer chip(it's a USB module, you can see the port), these are nonfunctioning
- The arm/safe switch pulls up and rotates
- All of the visible and most nonvisible, fasteners are National Aerospace Standard NAS
- The length, the wingspan, fin span, and main body tube are exact dimensions to the real AIM-9X Sidewinder. These are known dimensions
- All of the hangers height from center point, width are identical to the real AIM-9X Sidewinder
- The missiles fits the real LAU launcher, I have one and test fit them
- You can mount it on any fighter that's equipped to hold a Sidewinder
- Some critical parts are bonded using 3M DP420, you would break the metal before the bond
- All 3D Printed parts are printed using 3DXtech CarbonX Carbon Fiber PLA filament(carbon strands, not carbon powder)
- All decal content, size, and location is accurate
- All aluminum is first cleaned with Bonderite acidic cleaner, then conversion coated using a Bonderite conversion coating


------------------------------------------------
Other Models On Cults3D.com
------------------------------------------------
https://cults3d.com/:974768
https://cults3d.com/:1029651
https://cults3d.com/:1082332

------------------------------------------------------------
YouTube Videos Of Completed Builds
-------------------------------------------------------------

AIM-9X Sidewinder
--------------------------------
https://youtube.com/shorts/r5p5TG4fH5E?feature=share
https://youtu.be/xXPnrIIBXKg
https://youtube.com/shorts/sxr0Ynfl1CY?feature=share
https://youtu.be/K3fPECESJQs
https://youtu.be/0WwZuPO1FRk
https://youtube.com/shorts/ZFm9Df-bAW4?feature=share

AIM-54C Phoenix
----------------------------
https://youtube.com/shorts/4mqbeLsY0BU?feature=share
https://youtu.be/V9QhbfqRP8M

AGM-114R Hellfire
------------------------------
https://youtube.com/shorts/Rc1ZKKSAFoo?feature=share
https://youtu.be/V9QhbfqRP8M
https://youtu.be/jzuBxjZaKiw
https://youtu.be/cDcTIX0ohEg

AIM-120 AMRAAM
-------------------------------
https://youtu.be/1Xino9zbXEw

AIM-9L Sidewinder
-------------------------------
https://youtube.com/shorts/7D2o4xudfjo?feature=share
https://youtu.be/TQUYq4IlUKQ
https://youtu.be/oPYHocjhRYM


MADE TO ORDER - INQUIRIES
[email protected]

Тэги:

#sidewinder #missile #aim9l #sidewinder_missile #diy_missile #aim-9l #missile_replica #sidewinder_replica #aim9_model #aim-9_replica

Скачать видео