Setting up your inflatable hottub to get chemicals, water and leaks fixed - new for 2023

Hi Andy. Excellent video. I have a slightly different problem. My hot tub has deflated, but I have water coming out of the air valve. Any thoughts on the cause of this? Mike

Ripped jeans ………in vogue in the eighties , now they just look weird !

Andy I’ve already repaired mine with similar products but it’s leaking from the patch now do I repair the patch area or try and remove the patch and glue?

I repaired mine whist still full of air stupidly I know any suggestions.

Great solution with little hassle

I have just found my hot tub to be leaking .its on the inside about 2 inch from the top seam downwards and it's on the seam .not sure if it's a manufaction fault or not (when the heat welded the seam the material was bit thinner or to long joining it .) It's a small thin line about 3 mm long .

Can you repair on a seam or just claim on warranty for new one . Its 5 months old .

I can’t find the puncture on mine, tried everything

I've fixed the first leak on my tub but another one came up which I can't find,. It's so frustrating. Isn't there a company that can help?

Mine has developed a leak right on the top corner shoulder where the seam is. Ive used the patch that comes with it but its still leaking. Ive now bought the repair kit. Do i remove the patches first then use the kit with the glue ?

Hi. Great video. Unfortunately I messed my patch repair up! It peeled up at the edges so I pulled it off. Now I have glue that I can’t get off. Any tips in getting the glue off and starting again?

These are amazing products if they can just reinforce the tub a tad more to prevent these small tiny pain in the ass hard to find worse place to have a leak leaks. On my second on right now, if it’s at the bottom of the tub I may take a shot with foam insulation spray. If all else fails im gonna snag my third and last one before I get my permanent hot tub.

I need help installing it

i tried so many things to fix my tub but once u put the water in its just too much pressure and the air always gets out somehow

no volume for 95% of the "talking" makes for a crappy video. just saying.

How did you get so many holes in the upper surface of the tub? I would expect to find a hole in lower surface that sits on the ground.

How would I repair a tear in a hot tub liner? It’s a clever spa?

Use Sanitary silicone. Bonds well and will dry solid like rubber. I applied a small layer across the bottom to make the base more durable

Do you think this would be suitable to use for an airbed puncture?

Very good

Ooooh shut that door

You probably punctured it with those fingernails.

Used same kit multiple times and it blows out eventually

This is not how you fix a hot tube, please, I have a much better method.