First Build 80% Scale AIM-9X Sidewinder Missile (Replica Model) #sidewinder #missile

MADE TO ORDER - INQUIRIES
[email protected]


3D Print Files for this and my other models are available at Cults3D. com

RAYTHEON AIM-9X SIDEWINDER MISSILE
https://cults3d.com/:974768

PROFILE AND DESIGN COLLECTION
https://cults3d.com/@ZombieSNIPER666


This is my first 80% Scale Replica Model of AIM-9X Sidewinder Missile.

I strictly build U.S. Military Air To Air and Air To Ground Missiles. I've been obsessing over it for about 5 years. I am constantly researching dimensions, geometry, and part location of any of the missile replicas I build. If I don't have good enough reference material, I don't build a model. The AIM-9, AIM-9L, and AGM-114 all are created from excellent reference material. Most of the AIM-9L is referenced from real parts I own.

LIKE & SUBSCRIBE .

I hope you like the video! Any feedback is appreciated.

Here's some info on what goes into the build and some features

FULL SCALE AIM-9X SIDEWINDER MISSILE
- Based on 5" aluminum tubing, 1/4" wall
- The entire model comes apart and can easily be put back together
- There are over 120 individual parts, and over 350 fasteners
- Rear wings rotate
- Rear wings are removable, they are held in with ring magnets and a short steel shaft
- The paint is Sherwin Williams Aerospace Military Coating, it's the paint they use on the real Sidewinders. It's 2 part urethane
- The seeker camera is on a 3d printed gimbal, it rotates and angles up and down
- Thrust vectoring vanes rotate
- Targeting section has Lexan windows, real photosensors, and a real computer chip(it's a USB module, you can see the port), these are nonfunctioning
- The arm/safe switch pulls up and rotates
- All of the visible and most non-visible, fasteners are National Aerospace Standard NAS
- The length, the wingspan, fin span, and main body tube are exact dimensions to the real AIM-9X Sidewinder. These are known dimensions
- All of the hangers height from center point, width are identical to the real AIM-9X Sidewinder
- The missiles fits the real LAU launcher, I have one and test fit them
- You can mount it on any fighter that's equipped to hold a Sidewinder
- Some critical parts are bonded using 3M DP420, you would break the metal before the bond
- All 3D Printed parts are printed using 3DXtech CarbonX Carbon Fiber PLA filament(carbon strands, not carbon powder)
- All decal content, size, and location is accurate
- All aluminum is first cleaned with Bonderite acidic cleaner, then conversion coated using a Bonderite conversion coating

Here are links to longer videos of the same AIM-9X Sidewinder Missile build

https://youtu.be/0WwZuPO1FRk
https://youtu.be/K3fPECESJQs

AIM-9X SIDEWINDER AIR-TO-AIR MISSILE FULL SCALE
https://youtu.be/xXPnrIIBXKg
https://youtube.com/shorts/sxr0Ynfl1CY?feature=share
https://youtu.be/K3fPECESJQs
https://youtube.com/shorts/ZFm9Df-bAW4?feature=share
https://youtu.be/0WwZuPO1FRk

AIM-9L SIDEWINDER AIR-TO-AIR MISSILE FULL SCALE
https://youtube.com/shorts/7D2o4xudfjo?feature=share
https://youtu.be/TQUYq4IlUKQ

AIM-9L SIDEWINDER AIR-TO-AIR MISSILE 57% SCALE
(this is the 1st replica I built)
https://youtu.be/oPYHocjhRYM
https://youtu.be/QQaVYGyS--c

AIM-120 AMRAAM AIR-TO-AIR MISSILE 57% SCALE
https://youtu.be/1Xino9zbXEw

AIM-54 Phoenix AIR-TO-AIR MISSILE 40% SCALE
https://youtube.com/shorts/VxkL96oUEms?feature=share

AGM-114 HELLFIRE AIR-TO-GROUND MISSILE 71% Scale
https://youtube.com/shorts/Rc1ZKKSAFoo?feature=share
https://youtube.com/shorts/4mqbeLsY0BU?feature=share
https://youtu.be/V9QhbfqRP8M
https://youtu.be/jzuBxjZaKiw
https://youtu.be/cDcTIX0ohEg


Digital Renders
I use AutoDesk Fusion 360 to create a digital model of the missile I want to build. Then I fabricate the replicas from the digital model.

AIM-9 Sidewinder Missile
https://cults3d.com/:1029651

AIM-9X Sidewinder Missile
https://cults3d.com/:974768

MADE TO ORDER - INQUIRIES
[email protected]

Тэги:

#sidewinder_missile #aim9x #RAYTHEON #aim-9x #heat_seeking #air_to_air #f-14 #f14

Скачать видео